Disc Mulcher / The Rage

Description

Our Skid Steer Mulching Mower is designed to de-forest an area and return the debris back to the environment. The Rage cuts trees up to 14” in diameter and mulches trees up to 6”. If you need a powerful, reliable mulching mower in your arsenal, you need the Forestry Mulcher Mower.

• Parker Piston Motor is Made in Sweden with the highest quality materials and featuring maximum starting torque

• Motor is covered and a storage compartment on deck stores tools such as replacement tooth ratchet

• 1,045 pounds of disc mass unleashes massive amounts of rotational energy to destroy trees and brush

• 1.5” thick disc is the most durable in the industry and consists of one 3/4” plate and two 3/8” plates

• Top deck is made of grade 50 steel for maximum strength and durability

• Curved shroud at disc rear creates a smooth, consistent mulching chamber increasing efficiency

• Optional replaceable carbide  teeth are designed to withstand contact with rocks and ground debris

• Perimeter cutting teeth are designed to rotate as they wear and easily replaceable

• Tooth holders are heat treated to withstand tough wear and tear with no cracking

• Tooth protector fins are made 3/4” AR400 steel to protect outer teeth from direct impact

• Front deflector is floating on a pivoted joint to flip up so it’s not damaged when encountering obstacles and can also be pinned up during maintenance

• Open front mower easily feeds to the disc and increases visibility

• Exclusively designed slanted push bar positioned forward cuts brush and small trees, horizontally to guide larger trees into mulching chamber, and prevents trees from hanging on deck after cutting

• 4” diameter bearing shaft easily carries the strong forces and weight of disc and has a metal shaft seal protector that turns with the output of the shaft for ultimate protection of the shaft seal

• Exclusive rasp bars under deck create a fine mulch to minimize plugging and clogging

• Bolting flange uses 12, grade 9 bolts to spread-out stress to help decrease maintenance work

• Model	Mulching Mower
  Part Number	901352
  Motor Type	Fixed Displacement Piston
  Cutting Capacity	Up to 14″
  Mulching Capacity	Up to 6″
  Operating Weight	2,750 lb.
  Height	43″
  Width	70″
  Length	73″
  Cutting Width	60″
  Disc Thickness	1.5″
  Bearing Carrier	Oil Bath
  Output Shaft Diameter	4″
  Flange Diameter	12.38″
  Flange Bolts	(12) 3/4″ Grade 9
  Deck Top Material	1/2″ Grade 100
  Disc Mass With Teeth	1,045 lb.
  Skid Shoe Material	1/2″ AR400
  Flow Rate	32-45 GPM
  Pressure Range	3,000-6,000 PSI
  RPM At 40 GPM	1200
  Bottom Beaver Teeth Qty.	8
  Edge Beaver Teeth Qty.	12
  Top Beaver Teeth Qty.	10

   

   

   

​